6.
Use the left grounding terminal to connect the battery module, depending on the
local regulation, to the inverter grounding or to the main grounding.
Figure 16: Connnecting the grounding terminal
7.
Make sure the Inverter is turned off, then use the upper pair of DCconnectors (BAT-
and BAT+) to connect power from the inverter. Note the polarity. Insert the
connectors into this socket until you hear a click.
Figure 17: Connecting power from the inverter
8.
Figure below shows the single battery module with completed connections.
Home Battery 48V Installation Guide MAN-01-00954-1.1
24 Connecting a Single Battery Module
To Next Page
Loading...
