SolarEdge Solar Inverter - Step 2, Connecting a Module to a Power Optimizer

Chapter 2: Installing the Power Optimizers
SolarEdge Installation Guide – MAN-01-00057-2.2
13
Step 2, Connecting a Module to a Power Optimizer

Connect the Plus (+) output connector of the module to the Plus (+) input connector of the power
optimizer.

Connect the Minus (-) output connector of the module to the Minus (-) input connector of the power
optimizer.
Figure 1: Power optimizer connectors
NOTE:
Images are for illustration purposes only. Refer to the label on the product to identify the plus and
minus input and output connectors.
Output
Input
Connect to module
+
-
-
+
Mounting bracket