Providing Installation Information
Paper Template
Fill out the Physical Layout Template using the detachable 2D barcode stickers on each power optimizer.
Once the form is completed, scan it and upload the scanned file to the SolarEdge monitoring portal during
site registration. For an example paper template, refer to http://www.solaredge.com/files/pdfs/physical-
layout-template.pdf.
.
iPhone Site Mapper
Use the SolarEdge Site Mapper iPhone application to scan the power optimizer and inverter 2D barcodes.
The application creates an XML file that can be uploaded to the SolarEdge monitoring portal during site
registration. The SolarEdge Site Mapper can be downloaded from the Apple iTunes Store.
For detailed information, refer to the SolarEdge Site Mapper Software Guide or to the Site Mapper demo
movie, available on the SolarEdge website at http://www.solaredge.com/groups/installer-tools/site-
mapper.
Creating a Site in the SolarEdge Monitoring Portal
Create the site in the monitoring portal using the registration form available at the following link:
http://www.solaredge.com/groups/site-registration. Fill out all required information in the form, which
includes information about your installation, as well as details about its logical and physical mapping.
To Next Page
Loading...
