SolaX Power X1-Hybrid-3.0-LV - Page 48

Electrical Connections
44
EPS
Step 7 Insert the crimped cables into the corresponding L, N, and PE termi-
nals according to the wire sequence and tighten the screws by cross screw-
driver. Twist to tighten the screw caps and seals rings.
Loosen the screw
Schematic diagram of Grid, GEN and EPS (O󰀨-grid) connected.
GEN GRID
M4
1.5±0.1 N·m
EPS
GEN
GRID