Electrical Connections
47
Step 8. Remove the screw.
Step 9. Use cross screwdriver to tighten the
screw. Twist to tighten the swivel nut
.
For battery connection from 3.0 kW to 4.0 kW
:
Step 5. Remove the sealing cover of the plug.
16-25 mm²
Recommend 16 mm² copper wire
+ -
M6
5.0±0.1 N·m
+ -
+
-
Step 6. Pass the previously assembled cables
through the corresponding swivel nut.
+
-
Step 7. Find the battery interface, insert the positive cable into BAT+ port and the negative cable
to BAT-port.
+ -
M6
5.0±0.1 N·m
+ -
+ -
-+
+ -
To Next Page
Loading...
