SolaX Power X3-Hybrid G4 Series - 10 Operation on LCD; Introduction of Control Panel

77
10 Operation on LCD
10.1 Introduction of Control Panel
Power 0W
Today 0.0KWh
Battery 80%
Normal
Timely output power
Battery indicator light
Status or error information
Today's energy
Error indicator light
Operating indicator light
ESC Up Down Enter
Battery SOC
Figure 10-1 Control Panel
• In a normal state, the Power, Today and Battery information will be displayed.
You can press the keys to switch information.
• In an error state, the fault message and error code will be displayed, please refer
to "12.2 Troubleshooting" for corresponding solutions.
Table 10-1 Definition of indicators
LED indicator Status Definition
Operating
Light on The inverter is in a normal state.
Blinking
The inverter is in a waiting or checking
state.
Error
Light on The inverter is in a fault state.
Battery
Light on
The battery communication is in a
normal state.
Blinking The battery is in an idle state.