SolaX Power X3-Hybrid G4 Series - Introduction of Main Interface; Introduction of Submenus Interface

78
Operation on LCD
Table 10-2 Definition of keys
Key Definition
ESC key
Exit from the current interface or function
Up key
Move the cursor to the upper part or increase the value
Down key
Move the cursor to the lower part or decrease the value
Enter key
Confirm the selection
10.2 Introduction of Main Interface
The main interface is the default interface, the inverter will automatically jump to this
interface when the system starts up successfully or is not operated for a period of time.
Power 0W
Today 0.0KWh
Battery 80%
Normal
• Power means the timely output power.
• Today means the energy generated within the day.
• Battery means the battery SOC.
• Normal means the inverter is in normal status. When the inverter is in fault status,
the error code and information will be displayed.
10.3 Introduction of Submenus Interface
Menu
"System ON/OFF"
"Mode Select"
"System Status"
"Parallel Status"
"History Data"
"Setting"
"About"