134
Electrical Connection
Figure 7-80 Crimping terrminals
Step 7: Anti-clockwise the swivel nuts of the EPS (INV) and Grid (INV) port.
Figure 7-81 Loosening the Grid (INV) and EPS (INV) swivel nut
Step 8: Thread the assembled EPS (INV) and Grid (INV) cable through the swivel nuts, the
corresponding port and then into the matebox.
Figure 7-82 Threading EPS (INV) and Grid (INV) cables through the ports
Step 9: Connect L1, L2, L3, N and PE cable of the EPS (INV) and Grid (INV) cable to the L1,
L2, L3, N, PE terminal in the matebox respectively. Tighten the two swivel nuts.
To Next Page
Loading...
