128
12 Decommissioning
12.1 Disassembling the Inverter
WARNING!
• When disassembling the inverter, strictly follow the steps as below.
• Only use measuring devices with a DC input voltage range of 1000 V or higher.
Step 1: Disconnect the external AC breaker and AC cable of the inverter.
Step 2: Turn the "DC" switch to "OFF" position.
Figure 12-1 Turning off the DC switch
Step 3: Turn off the battery switch / button / breaker (if any). (See documents of battery)
Step 4: Wait until the LCD screen turns off.
Step 5: Disconnect the PV connecters: Insert the removal tool into the notch of PV
connectors and slight pull out the connectors.
Figure 12-2 Releasing the PV connector
To Next Page
Loading...
