Solax GENIE+ User Manual

7
Fig.9
Fig.10
Fig.11
Fig.12
Fig.13
Open the handle switch outward (Fig. 12) and make it in loose state. Then the handle
back down. Buckle up the handle switch after the handle drawtube draw back in place (Fig.13 ).
drawtube will draw
Telescopic Handle
When you press the button, it will sound the beeping alarm.
In order to prevent accidents and injury, please use it in time.
Horn Button (Fig.11 )
● Hold the rubber handlebar with both hands.
● Pull the control lever on the right, the scooter will go forward.
● Pull the control lever on the left the scooter will go backward.
● When the scooter moves backward, the horn will start the beeping.
● The control lever will return to the center position when released
and the brake will be locked.
The direction control lever is used to control the forward and
backward.
Direction Control Lever (Fig.10 )
Power Indicator (Fig.9 )
Switch the rocker switch to［ON］,the power indicator will show the
power condition. Green means the power is enough; yellow means
the power is weak; red means it needs recharging.

Solax GENIE+ Specifications

General

Brand	Solax
Model	GENIE+
Category	Scooter
Language	English