7
INFORMATION ON THE STATUS OF THE LED
Green LED: normal operation
Blinking green LED: One channel is in progress (the ashing number
corresponds to the station number activated).
Green LED and Red Flashing: One channel is in progress and the
rain sensor is activated or a station is in progress and the product is in
permanent OFF or several days.
LED Red Fixed: the product is in initialization mode
LED Red Flashing 2 times: The programmer has lost time, reconnect
to re-synchronize.
LED Red Flashing 4 times: One of the stations has a short circuit or is
overconsumption. The other reason is that you probably have powered
down 2 times in a short time while a station is still in progress.
LED Red Flashing 5 times: You have exceeded the time required to
initialize the timer. Repeat the initialization procedure.
LED O: The product is not powered.
To Previous Page
Loading...