MADELAY
Controls assignment:
Knob • — TEMPO — controls the switching speed between delay read points;
Knob • • — FRZ TIME — controls the length of the frozen loop when the FX sensor is pressed;
Knob • • • — DLY FB — controls the delay feedback depth;
Sensor FX — FREEZE — freezes a small fragment. The length of the frozen part is determined
by the FRZ TIME knob.
Description:
MADELAY is a unique delay with a read point that rhythmically jumps from one part of the
delay to another, creating a number of interesting effects. The speed of the jumps is controlled
by the TEMPO knob, so you can sync the effect to your track or another beat. The TEMPO
in this algorithm is synced to the TEMPO in the next algorithm, so you can switch back and
forth between the 2 algorithms during your performance, using it as a creative technique.
The FREEZE sensor freezes a small part of the delay, creating a synthetic effect. While holding
the sensor, you can change the length and pitch of the frozen fragment using the FRZ TIME
knob. You can create additional interesting effects using this knob.
The frozen fragment is located at the very beginning of the delay. To make the freeze effect
noticeable, touch the sensor when there is audio input, or turn DLY FB high enough.
Things you should try:
1. Quickly pronounce words or make percussive sounds.
2. Quickly tap the FREEZE sensor turning FRZ TIME at the same time.
To Next Page
Loading...
