SWITCHABLE BASSDRUM
Controls assignment:
Knob • — TUNE — adjusts the bass frequency of the drum;
Knob • • — PITCH — controls decay time of the frequency accent;
Knob • • • — DECAY — controls decay time of the drum sound;
Sensor FX — BD TRIG — switches on the bass drum.
Description:
This algorithm is a variation of the previous algorithm, in which the direct sound from the
microphone alternates with the synthesized bass drum with the use of the FX sensor. As a
result, you can produce a certain groove by touching the FX sensor when you need a bass
drum.
A small amount of sound from the microphone also mixes into the signal when the FX sensor
is pressed and you play the bass drum. As a result, you have the ability to mix the signal
from the microphone and the synthesized bass drum sound.
Tips for using this algorithm:
With your mouth, make sounds that simulate hi-hats and a snare drum, and press the FX
sensor when you need a bass drum. Apply the tips from the previous algorithm.
Try playing the algorithm making various unusual sounds, not necessarily percussive ones.
BASSDRUM + SNARE
Controls assignment:
Knob • — TUNE — adjusts the base frequency of the drum;
Knob • • — SD DCY — controls decay time of the snare drum;
Knob • • • — DECAY — controls decay time of the bass drum;
Sensor FX — BD TRIG — switches the synthesis from the snare to the bass drum.
Description:
This is a variation of the two previous algorithms, with the addition of a snare drum. When
the FX sensor is not pressed, a snare drum will sound. When it is pressed, it will switch to
the bass drum.
To Next Page
Loading...
