Need help?Do you have a question about the SOMFY Axovia 220A and is the answer not in the manual?
General| Max Door Weight | 200 kg per leaf |
|---|---|
| Control System | Integrated electronic control unit |
| Motor Voltage | 24V DC |
| Operating Temperature | -20°C to +60°C |
| Protection Rating | IP44 |
| Maximum Power | 150W |
| Power Supply | 230V AC |
| Max Gate Length | 2.0 m per leaf |
| Safety Features | Obstacle detection |
Follow all safety guidelines regarding electrical, operational, child, and maintenance precautions.
Measure gate dimensions, identify distances, and mark the AM axis on the pillar.
Connect motors M1 and M2 to the designated terminals on the control unit.
Memorize gate travel and set operating modes (sequential/semi-auto), then secure the settings.
Check mains supply, power cable, and fuse if LED L1 does not illuminate on power-up.
Diagnose photocell faults (alignment, cables, power, mode) if LED L3 remains constantly lit.
Verify motor connections, extension cables, and connector colors for proper motor operation.
To Next Page