EasyManua.ls Logo

Somogyi SAL BX 1065 - User Manual

Somogyi SAL BX 1065
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CAR AmplifiER
BX 1065
eredeti használati utasítás
instruction manual
návod na použitie
manual de utilizare
uputstvo za upotrebu
navodilo za uporabo
návod k použití

Questions and Answers

  • B
    Benjamin FrankAug 4, 2025
    What to do if noise disappears after unplugging RCA cables in Somogyi Car Amplifier?
    • S
      staceypattersonAug 4, 2025
      If noise disappears after unplugging RCA cables, possible causes are a ground loop or bad ground contact at the head unit, equalizer, sound switch, or another device in the audio frequency chain. Check for a faulty circuit-breaker, old battery, bad ignition cables, or bad contacts.
  • A
    Ashley FranklinAug 11, 2025
    Why is there brum or noise after disconnection in Somogyi SAL BX 1065 Car Amplifier?
    • R
      Ronald TaylorAug 11, 2025
      Brum or noise after disconnection can be due to a contact error on the main unit, crossover, equalizer, or the device connected to the system. It may also be caused by faulty wiring in the car's electrical installation, an old battery, or engine ignition faults. Unplug the HIGH IN connection and then check the correctness of the connected ground.
  • J
    Jennifer MarksAug 19, 2025
    How to troubleshoot Somogyi Car Amplifier that fails to operate?
    • D
      dickersonmichaelSep 12, 2025
      If the amplifier fails to operate, use a voltmeter to check whether the 12 Volt power supply reaches the device and whether the base connection is fault-free.
  • A
    andrewzamoraAug 27, 2025
    What to do if there are noises from Somogyi SAL BX 1065 Car Amplifier after turning down the volume?
    • C
      Corey HodgesAug 27, 2025
      If you are experiencing noises from the system after turning down the volume, unplug the HIFG IN connectors from the amplifier. If the noises are still audible, ensure the amplifier is adequately grounded.

Summary

Technical Data

Product Features

Amplifier Connections

Connecting Speakers

Connect speakers with correct polarity. Use 2 or 4 Ohm speakers. Only subwoofers allowed.

Connecting Input Signal

Connect HIGH IN to sound source speaker output. Ensure stable, isolated connections with correct polarity.

Connecting Power Supply

Connect PWR (+12V), REMOTE, and GND. Use proper gauge cables (4-6mm²) and keep cables short.

Installation and Operation

Installation Guidelines

Ensure proper ventilation. Protect from elements. Mount securely. Avoid covering the unit.

Setting Input Signal Level

Increase car stereo volume until musical peaks distort. This is max volume without distortion. Avoid distorted sound.

Troubleshooting and Warnings

Troubleshooting Common Issues

Check grounding, connections, and power. Address noise issues by isolating components. Check fuses.

Safety Precautions

Requires skilled installation. Listen responsibly. Avoid prolonged use with engine off. Protect from elements.

Somogyi SAL BX 1065 Specifications

General IconGeneral
BrandSomogyi
ModelSAL BX 1065
CategoryCar Amplifier
LanguageEnglish