Need help?Do you have a question about the Somogyi VC 830L and is the answer not in the manual?
Rotary switch for selecting functions, measurement ranges, and unit power.
Connection point for the black probe cable.
Connection for red probe cable for voltage, resistance, and low current.
Connection for red probe cable for high DC current measurements.
Freezes the displayed reading and shows an 'H' symbol.
Activates the display backlight for a few seconds.
Read instructions carefully to avoid injury or damage. Understand warnings before use.
Explanation of symbols: important warning, dangerous voltage, grounding, double grounding.
Avoid electromagnetic interference, exceed safety limits, or use above 600V.
Exercise caution with voltages above 60V DC or 30V AC to prevent electric shock.
Do not use in flammable areas; check unit for proper operation before use.
Connect probes to circuit, select range, read display. Handles reverse polarity display.
Interrupt circuit, connect probes to measure current. Includes over-current protection.
Connect probes, select range, read display. Suitable for AC voltage up to 600V.
Test diodes by connecting to anode/cathode; test continuity with buzzer for <70Ω.
Connect probes to resistance, select range, read display. Deduct cable resistance.
Replace batteries when '+' icon appears; fuses rarely need replacement. Observe polarity.
Manual, probe cable, and 9V (6F22) battery box are included.
Dispose of waste equipment and batteries responsibly at designated collection points.
Details power, display, operating temp, overload protection, fuse type, dimensions, weight.
General| Brand | Somogyi |
|---|---|
| Model | VC 830L |
| Category | Multimeter |
| Language | English |
To Next Page