The owner of the SP100 or SP200/SP300 is called the Master. Only
the Master can control the SP100 or SP200/SP300. The letter M will
appear on the touch control panel when you are the Master.
SonarPhone Slave
Friends who connect and share your SonarPhone signal are called
SLAVES. They can use and watch the SonarPhone display, but will
have limited control. The letter S will appear on the touch control
panel when you are the Slave.
Note a SLAVE setting will not be possible unless a MASTER is actually
running.
Sharing a SonarPhone signal with Friends is EASY! Just ask the owner
of the SonarPhone for their WPA password, so you can become a “SLAVE”
to the owner or Master controller of the SonarPhone.
Again you start in the “Settings” of you phone or tablet. Select
WiFi and see what WiFi channels are available. Highlight the
SonarPhone channel you wish to watch and select it and then add
the WPA password from the Master and when it has been accepted and
when you see you are connected to the WiFi channel you simply exit
the “SETTINGS” and enter SonarPhone. Hit connect now and you are
good to go!
Please realize only the Master controller has complete control of
all menu functions, so you will notice some menu features simply
To Next Page
Loading...
