Tilt the head of the fan to the desired angle.
Adjusting the height of the fan
Loosen the screw at the top of the support tube by turning it anti-clockwise.
Lift the fan to the desired height.
Tighten the screw at the top of the support tube by turning it clockwise.
Remote control
Please insert 2 ‘AAA’ size batteries into the remote as per the marking in the remote cavity.
To fit the batteries, remove the cover from the rear of the remote control.
Insert 2 ‘AAA’ size batteries following the markings in the cavity.(+ for positive and - for
negative)
Re-fit the battery cover.
FAN STORAGE
Your fan can be stored in the off-season either partially disassembled of assembled. It is
important to keep it in a safe, dry location.
1. If stored disassembles, we recommend using the original (or appropriately sized) box.
2. If stored assembled or partially assembled, remember to protect the fan head from dust.
To Next Page
Loading...