Remote control
Battery installation: Remove the cover on the back of the controller and insert
2 AAA batteries.
Operate with the remote control: To operate the portable air conditioner using
the remote control, you must be within 5 meters of the device.
The control comes synchronized with the factory fan. In case of losing syn-
chronization, turn on the fan from the wall switch and press the “5” button. If
the pairing has been successful the light will ash twice. If it has not synced,
power o and repeat the process.
1. Turn the light on/o
2. Turn o
3. Summer function
4. Winter function
5. Pair
6. Turn o the fan
7. Speed
8. +/- Brightness
9. Gradual light adjustment
10. 6000/3000/4000K
11. Night light
12. Natural air
13. Timer
Do not activate the summer/winter
function if the fan is running.
To Next Page
Loading...
