TECHNICAL SPECIFICATIONS
Power 45 watts RMS from 20 Hz to 20 kHz
50 watts RMS at 1 kHz
(40 ma. bias, 1 channel driven)
Frequency Response 5 Hz to 40 kHz + 0.5 dB
(1 watt into 3.5 ohms) 4 Hz to 90 kHz - 3.0 dB
Input Impedance 100 Kohms
Input Sensitivity .80V RMS at 1 kHz for 40 watts
Power Requirements 250 VA 50/60 Hz (Maximum)
Fuse Requirements 2 1/2 Amp 250V slo-blo - 100V to 120V Countries
1 1/4 Amp 250V slo-blo - 200V to 240V Countries
Tube Complement 2 - Matched pair EL34/E34L 4 - 6DJ8
Dimensions 16 in. Wide x 12.5 in. Deep x 7 in. High
Weight 36 lbs. (16.5 kg) - unpacked
NOTE: All specifications based on the use of factory supplied tubes.
To Previous Page
Loading...
