29
USER GUIDE NANO BTE
B: How to Clean the Thin Tube
If you have the thin tube system, make sure that the tube
and dome are kept free of ear wax at all times.
· Grasp the adapter firmly and disconnect the thin tube
connector from the hearing aid adapter by pulling it off
(A)
· Use a soft dry cloth or tissue to clean the outside of the
thin tube and dome
· To remove wax from the thin tube, insert the cleaning
wire at the connector end. Push the wire all the way
into the thin tube until it comes out through the dome.
(B)
· Pull the cleaning wire out through the dome and
discard it (B)
To Next Page
Loading...
