Sonic TV Adapter - SoundGate Initial Setup; Pairing Devices; TV Listening Operations; Listening Preparation

TV Listening/Start and Stop
Before listening
Wear the SoundGate around your neck with the neck
strap. You must be within 30 feet /10 meters from the
TV set. Use the SoundGate audio key for TV
listening.
START sound
Press the audio key. The SoundGate will
connect to the TVadapter. After a few
seconds a solid orange light will be shown
on the SoundGate and TV adapter. The
hearing instruments will then receive the
TV sound.
STOP sound
Press the audio key. The SoundGate will disconnect
from TV adapter. Allorange lights will turn off. The
hearing instruments will then return to the previous
listening program.
Notice
The Bluetooth
®
function on the SoundGate must be
activated to allow transmission from the TV. If not
active, it will automatically turn on when starting the
TV listening. De-activating the Bluetooth
®
function
must be done manually with the Bluetooth
®
key.
Status
Prepare SoundGate for TV Listening
The very first time your SoundGate is used with the
TV adapter, the two devices must be paired together.
Pairing
In order to pair the TV adapter and the SoundGate,
the devices must be placed close together. Place the
SoundGate right next to the TV adapter (less than
1 ft
/ 30 cm between devices).
1. Press the SoundGate Bluetooth
®
key for
5seconds until the blue light starts flashing
rapidly.
2. The two devices are now establishing a connection
with each other. Wait one minute.
3. After one minute the TV adapter connects to
the SoundGate and the pairing is complete.
The orange STATUS indicator on the TV
adapter will show a solid light.
Pairing should be completed only once and will
normally not have to be repeated.
Status
Notes