4
Caution
Do not clean the unit with organical solvents,
diluents, abrasives.
Before cleaning, filling with water is a must;
otherwise the unit may be damaged.
Prohibit washing the complete unit with
water, to reduce the risk of electrocution.
The product may be off or can't be switched off when it is subjected to electromagnetic
interference like Fast Transients or Surge voltage, but it can recover after being re-plugged
in the socket, and then just follow the instruction described in this manual to set the
function again for normal operation.
Infirmly inlaid studs on decorations may shed off during cleaning.
Unfastened parts may also meet above problem.
Do not merge non-waterproof watch into water.
Do not add too much water.
Never let water overflow.
Do not dissect the unit except the
authorized service man.
Repeat working cycle can enhance the
cleaning effect. While the better interval
is longer than 5 minutes.
To Next Page
Loading...