/06
How to insert
a new SIM card
Step 1
Use the included screwdriver to unfasten the
battery door screw on the back of the phone.
Step 2
Remove battery door and battery.
Step 3
Select a SIM tray to use. Slide the SIM door to
the left and open the SIM card tray. Insert the
new SIM card in the door. Close the SIM door by
sliding the door to the right until you hear a click to
lock it in place.
/07
How to insert the battery
Step 1
Insert the battery flush into the cavity such that the
four metallic contacts on the bottom of the battery
are aligned with the metallic contacts within the
battery compartment.
Step 2
Close the battery cover by turning the screw in a
clockwise direction using the screwdriver provided.
Please ensure you do not over-tighten the screw.
Initial Phone Set-up
Insert the SIM card into your device. Then, insert
the battery and screw the battery cover closed.
Fully charge your battery (for about 2 hours). Once
fully charged, press and hold Power On / Off key
to turn power on. After the phone successfully
registers with the network, the name of the service
provider is displayed in the Notification Bar.
When powering the phone on for the first time,
follow the instructions shown on the screen.
After the initial set-up is complete, the Home
Screen is displayed.
Make a call
From the Home Screen, Select the Phone app.
Use the keypad or select a Contact. Select the
green Phone button to enable call.
Set-up Wi-Fi
From Home Screen, slide up the screen to
open the App tray:
Settings > Network & Internet > Wi-Fi>On >
Choose Network > Enter Password > Connect
To Next Page
Loading...
Need help?
General
