SONIQ QT166 User Manual

SONIQ Smart TV remote pairing procedure
Remote has to be used with RF dongle in order to function properly. RF dongle comes in the same
plastic bag that holds the remote. It is a black USB flash drive like device which is about 3.5 x 1.5 x
0.5 cm in size and labelled with QT166 RF Dongle on its side.
1. Charge up remote for 5 hours
2. Switch on remote
3. Switch on TV using remote
4. Switch off remote for 2 seconds and switch on again
5. Press and hold the RF button on the keyboard side of remote for 4 seconds
6. Plug in the RF dongle to TV USB port
7. Place remote next to TV and wait for a minute for pairing to complete
"How To" video
http://bit.ly/1uheycv

SONIQ QT166 Specifications

General

Brand	SONIQ
Model	QT166
Compatibility	SONIQ TVs
Power Source	2 x AAA Batteries
Infrared Range	Up to 8 meters
Type	Remote Control
Buttons	Power, Mute, Volume Up/Down, Channel Up/Down, Menu, Input, Number Keys (0-9), Recall, Display, Guide, Exit, Navigation Arrows, OK

Summary

SONIQ Smart TV Remote Pairing Procedure

Charge Remote

Charge the remote for 5 hours before proceeding with pairing.

Switch On Remote

Turn on the remote control to initiate the pairing process.

Switch On TV

Power on the TV using the remote control.

Cycle Remote Power

Turn the remote off for 2 seconds, then turn it back on.

Press RF Button

Press and hold the RF button on the remote's keyboard side for 4 seconds.

Connect RF Dongle

Insert the RF dongle into a USB port on the TV.

Complete Pairing

Place the remote near the TV and wait for pairing to finish.