Need help?Do you have a question about the SONNETEER Alabaster and is the answer not in the manual?
Ensure the amplifier is placed in an open space away from moisture with adequate ventilation.
Connect via IEC mains lead. Fuse is replaceable; check specifications or rear of machine.
Features five inputs (Tp, CD, DIR, L1, L2) and one output (LnOut). Recommends DIR/CD for performance.
Use bare wire through binding posts or spade connectors. Avoid shorting positive and negative wires.
Controls from left to right: Power, Source select, and Volume.
Clean with a dry cloth; no solvents. Refer servicing to dealer; tampering voids warranty.
Caution: Amplifier runs hot. Ensure it is well ventilated.
52Wrms @8 Ohms, 95Wrms @4 Ohms.
Input impedance is 11k Ohms, Gain is 33dB.
DIR, CD: 470 mVrms; L1,L2,Tp: 250 mVrms.
Bandwidth 8Hz to 80kHz. THD 0.004% @1kHz, 0.005% @10kHz.
Size (mm): 434 x 74 x 280.
UK/Europe/Australasia: 230V/240V, T 3.15Amp. USA/Canada: 110V/120V, T 5.0 Amp.
To Next Page
General