Buff-n-Dry Machine – Owner’s
Manual
© SONNY’S The CarWash Factory SonnysDirect.com
This document is confidential and proprietary to SONNY’S and cannot be used, disclosed or Page 5 of 31
duplicated without prior written consent. Content, prices, and availability subject to change without notice. 9.23.2021
10013911-R3.docx3
12. Do not operate any piece of equipment that requires safety covers with those covers
removed or improperly installed. Do not operate any piece of equipment if any
component of that piece is suspected to be defective or malfunctioning.
13. Store all cleaning and washing solutions and oils in a well-ventilated area. Clean up fluid
spills immediately to prevent hazardous safety conditions. Be certain to follow all safety
procedures on SDS Sheets for each chemical product used.
14. All electric systems in the wash tunnel equipped with a torque relief or overload should be
checked and set at the minimum amount that will allow for proper functionality under
normal washing conditions.
15. No unauthorized people should ever be permitted in the wash tunnel or near the
equipment at any time.
* * *
! ! CAUTION ! !
When a piece of equipment must be in operation during inspection or maintenance, one
qualified technician must stay at the power disconnect switch while another qualified
technician performs the inspection or maintenance.
To Next Page
Loading...
