Sonos ZoneBridge Setup Guide
10
Adding More Sonos Components
Once you’ve set up your ZoneBridge, you can easily add more components any time. If
your house has structured (built-in) wiring, you can make a wired connection to
additional ZonePlayers or ZoneBridges. If you don’t have structured wiring, our built-in
wireless technology is ideal for you.
Add a ZonePlayer or ZoneBridge
1. Choose one of the following options:
• If you are adding an amplified ZonePlayer, attach desired speakers.
• If you are adding a ZonePlayer 80, connect an external amplifier.
• If you are adding a ZoneBridge, attach the power adapter.
Note: Thick walls, 2.4 GHz cordless telephones, and the presence of
other wireless devices can interfere with the wireless network signals
from your Sonos Digital Music System. If you are experiencing difficulty, it
is advisable to relocate the Sonos component, change the wireless
channel your music system is operating on, or make a wired connection
(Ethernet cable) either from your router to the ZoneBridge, or from one
ZonePlayer to another (see page 15.) If you are having trouble placing
your units within wireless range of each other, visit our Web site at
http://faq.sonos.com/range.
Note: For detailed ZonePlayer setup instructions, refer to the Setup
Guide packaged with your ZonePlayer, or start your Desktop Controller
software and select
Sonos System Help from the Help menu.
To Next Page
Loading...
Need help?
General
