Sonos ZoneBridge BR100 User Manual

Sonos ZoneBridge Setup Guide
5
Adding To EXISTING Sonos System
If you are adding this ZoneBridge to an existing Sonos system, please follow the steps
below. If you are setting up a new Sonos Digital Music System, please turn to page 7
instead.
You can use a Sonos ZoneBridge to replace the ZonePlayer™ that is currently wired to
your home network, or place a ZoneBridge in any location to extend the wireless range
of your Sonos Digital Music System.
Attach the power adapter and plug in the ZoneBridge. Be sure it is the
proper power adapter for your country. Check for software updates by
choosing one of the following options:
•Use the Sonos Controller to check for software updates by selecting System
Settings→Online Updates from the Music menu.
•Use the Desktop Controller software to check for software updates by
selecting Help→Check for Updates.
If you are making a wired connection, connect an Ethernet cable (supplied). If
you are making a wireless connection, skip this step and continue.
Important: If you are replacing the wired ZonePlayer in your music
system with a Sonos ZoneBridge, first add the new ZoneBridge to your
music system (steps below). You can then unplug the wired ZonePlayer,
replace it with the Sonos ZoneBridge, and move the original ZonePlayer
to a new location.
1
2

Sonos ZoneBridge BR100 Specifications

General

Brand	Sonos
Model	ZoneBridge BR100
Category	Speaker System
Language	English