Quick Guide
Saving imageS on
SonoSite’S m-turbo
®
ultraSound SyStem
First create a folder to save e images in:
1) Switch on e system (power button top le on control panel), press Patient (keyboard)
2) Select New/End from e so keys (bottom of screen)
3) Enter e required patient detail. Under User, enter your initials (is helps wi sorting folders)
4) Press Done (bottom of screen) to continue to e live 2D screen
5) Your folder name will appear in e top le corner
6) Scan your subject and adjust e image accordingly by setting e Gain and Dep
Saving still images:
1) To save e image, press Freeze
2) Wi e overall Gain button, toggle rough e recorded frames (images)
(ese are not saved yet, only recorded retrospectively) and press Save to save
e required frame
Saving clips:
1) To select e time duration of e clip (2 sec to 60 sec): From e so keys on e bottom of
e screen, go to e 2nd page and press Clips, en select Time, or ECG in e case of echo,
and select e required duration
2) Continue live 2D scanning and press Clip each time you wish to save a ‘video’ clip
To Next Page
Need help?
General
