Sony a7CII User Manual

Back-lit subjects
Continuously repetitive patterns, such as the facades of buildings
Subjects in the focusing area with different focal distances
To always enable manual focusing operations when shooting still images
If you set [Full Time DMF] to [On], you can perform manual focusing operations regardless of the focus mode setting.
You can use both the auto and manual focus without changing the focus mode setting.
Hint
In [Continuous AF] mode, you can lock the focus by pressing and holding the button that has been assigned the [Focus Hold]
function.
When you set the focus to infinity in [Manual Focus] mode or [DMF] mode, make sure that the focus is on a sufficiently distant
subject by checking the monitor or the viewfinder.
Note
[Automatic AF] is available only when you are using a lens that supports phase detection AF.
When [Continuous AF] or [Automatic AF] is set, the angle of view may change little by little while focusing. This does not affect
the actual recorded images.
Only [Continuous AF] and [Manual Focus] are available when shooting movies or when the Still/Movie/S&Q dial is set to
(Movie) or S&Q (S&Q Motion).
Related Topic
Direct manual focus (DMF)
Manual Focus
Full Time DMF
Selecting the focus area (Focus Area)
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
TP1001159195
5-054-865-11(1) Copyright 2023 Sony Corporation
140

Sony a7CII Specifications

General

Effective Megapixels	33.0 MP
ISO Sensitivity	100-51200 (expandable to 50-204800)
Autofocus System	Fast Hybrid AF (phase-detection AF / contrast-detection AF)
Image Stabilization	5-axis in-body image stabilization
Continuous Shooting	Up to 10 fps
Dimensions	124.0 x 71.1 x 63.4 mm
Image Processor	BIONZ XR
Sensor Type	Full-frame CMOS
Video Recording	4K 60p
Viewfinder	0.39-type electronic viewfinder
LCD Screen	3.0-inch vari-angle touchscreen
Connectivity	Wi-Fi, Bluetooth, USB Type-C
Weight	514 g (with battery and memory card)
Memory Card Slots	1 (SD/SDHC/SDXC, UHS-II compatible)