Area/Date/Time Setting
Note
You can save up to 10 settings per memory card. When 10 settings have been already saved, you cannot perform [Save New].
Delete the existing settings using [Delete], or overwrite them.
You cannot load settings from a camera of a different model.
Even if the model name is the same, settings from a camera with a different system software version may fail to load.
You can use this function to save settings registered to [
Camera Set. Memory]. However, [Save/Load Settings] is
unavailable when the mode dial is set to 1/2/3 (
Recall Camera Setting). Set the mode dial to a position other than 1/2/3
before using this function.
TP1001166614
5-054-865-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
