Movie 3:
Wind Noise Reduction:
Off (Turn this off, it’s not pleasant. Added to this, it is always advisable to use
an external microphone, as on-board mics are generally not very good.)
Marker Display:
On (This puts various frames, aspect ratio or guidelines on the screen.
Changed by going to the menu below.)
Marker Settings:
Centre: Off/On – Adds a centre Mark
Aspect: 2.35:1
Safety Zone: Set this to what you like – Gives you an in guide as to what is in
frame
Guide Frame:
Move w/ Shutter:
Start recording with shutter button, as well as movie button.
Shutter/SteadyShot
SteadyShot
This function is mostly automatic and links with stabilisation in the lens. You
can turn it to manual and select the focal length of the lens you are using if
the lens is not a Sony.
Zoom:
Zoom Setting: On:
ClearImage Zoom
Display/Auto Review1:
Finder/Monitor:
Auto / Viewfinder only / Monitor Only
Zebra:
Zebra: On/Off
Zebra Level: 70% - 100% plus 2 custom settings
Grid Line:
Rule of 3rds Grid plus other options. This is very helpful for framing, probably
more so than the markers mentioned earlier.
Exposure Settings Guide:
On (Can be helpful, but can also be a hindrance.)
Display/Auto Review2:
Cont. Shoot. Length:
Always display
Auto Review:
On/Off plus time shown
To Next Page
Loading...
