Try to orient the face in front of the product and be as level as possible.
Give a clear smile with an open mouth. The smile is easier to be detected when the teeth are shown.
If you press the shutter button during Smile Shutter, the product shoots the image. After shooting, the product returns
to Smile Shutter mode.
Hint
When the [Smile/Face Detect.] is set to [Smile Shutter], you can select the Smile Detection Sensitivity from [On: Slight
Smile], [On: Normal Smile] and [On: Big Smile].
Note
You cannot use [Face Detection] with the following functions:
When using zoom functions other than the optical zoom
Up to eight faces of your subjects can be detected.
The product may not detect faces at all or may accidentally detect other objects as faces in some conditions.
If the product cannot detect a face, set the Smile Detection Sensitivity.
If you track a face using [Lock-on AF] while executing [Smile Shutter], Smile Detection is performed only for that face.
Notes on use
4-534-933-11(1)
Copyright 2014 Sony Corporation
To Next Page
Loading...
