SERVICE MANUAL
Published by Sony EMCS (Malaysia) PG Tec
Sony Corporation
BLU-RAY DISC
TM
/DVD HOME THEATRE SYSTEM
9-890-637-02
2014C80-1
©
2014.03
Ver. 1.1 2014.03
BDV-N5200W/N7200W/N7200WL/
N9200W/N9200WL
• BDV-N5200W/N7200W/N7200WL/N9200W/N9200WL are com-
posed of following models. As service manual are issued for each
component model, please refer to them.
COMPONENT MODEL NAME
BDV-
N5200W
BDV-
N7200W
BDV-
N7200WL
BDV-
N9200W
BDV-
N9200WL
Blu-ray disc
TM
/
DVD receiver
HBD-
N5200W
HBD-
N7200W
HBD-
N7200WL
HBD-
N9200W
HBD-
N9200WL
Front
speaker
SS-TSB137 SS-TSB135 SS-TSB136 SS-TSB133 SS-TSB134
Center
speaker
SS-CTB127 SS-CTB125 SS-CTB126 SS-CTB125 SS-CTB126
Surround
speaker
SS-TSB142 SS-TSB140 SS-TSB141 SS-TSB138 SS-TSB139
Subwoofer SS-WSB128 SS-WSB126 SS-WSB127 SS-WSB126 SS-WSB127
Wireless
amplifi er
TA-
SA700WR
TA-
SA500WR
TA-
SA600WR
TA-
SA500WR
TA-
SA600WR
SPECIFICATIONS
– Refer to the next page –
US Model
BDV-N5200W/N7200W
Canadian Model
BDV-N9200W
AEP Model
BDV-N5200W/N7200W/N7200WL/
N9200W/N9200WL
UK Model
BDV-N5200W/N7200W/N7200WL
Russian Model
Australian Model
Chinese Model
Saudi Arabia Model
Thai Model
BDV-N9200W/N9200WL
E Model
BDV-N7200W/N9200W/N9200WL
Mexican Model
PX Model
BDV-N5200W
Singapore Model
BDV-N5200W/N9200W/N9200WL
Taiwan Model
BDV-N9200WL
General
Main unit
Power requirements
US, CND models:
120V AC, 60Hz
PX model:
110V - 240V AC, 50/60Hz
MX model:
120V AC, 60Hz
MX6, E32 models:
110V - 240V AC, 50/60 Hz
Other models:
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 95 W (HBD-N9200W/HBD-N7200W/
HBD-5200W)
105 W (HBD-N9200WL/HBD-
N7200WL)
Standby: 0.3 W
Dimensions (w/h/d) (approx.)
480 mm × 78 mm × 212.5 mm
(19 in x 3
1
/8 in x 8
3
/8 in)
incl. projecting parts
Mass (approx.)
3.1 kg (6 lb 14 oz)
Surround amplifi er (TA-SA500WR) for
BDV-N9200W/BDV-N7200W
Surround amplifi er (TA-SA600WR) for
BDV-N9200WL/BDV-N7200WL
Surround amplifi er (TA-SA700WR) for
BDV-N5200W
Amplifi er Section
US model only:
TA-SA500WR
AUDIO POWER SPECIFICATIONS POWER
OUTPUT AND TOTAL HARMONIC DIS-
TORTION:
(FTC)
With 6 ohms loads, both channels driven,
from 180 Hz – 20,000 Hz; rated 55 watts
per channel minimum RMS power, with
no more than 1% total harmonic distortion
from 250 milliwatts to rated output.
TA-SA700WR
AUDIO POWER SPECIFICATIONS POWER
OUTPUT AND TOTAL HARMONIC DIS-
TORTION:
(FTC)
With 6 ohms loads, both channels driven,
from 180 Hz – 20,000 Hz; rated 45 watts
per channel minimum RMS power, with
no more than 1% total harmonic distortion
from 250 milliwatts to rated output.
Other models:
TA-SA500WR/TA-SA600WR:
POWER OUTPUT (reference)
Surround L/Surround R:
200 W (per channel at 6 ohms, 1 kHz)
TA-SA700WR:
POWER OUTPUT (reference)
Surround L/Surround R:
100 W (per channel at 6 ohms, 1 kHz)
Rated impedance
6 Ω
Communication system
Wireless sound Specifi cation version 3.0
Frequency band
US, CND, PX, AEP, UK, AUS, E12, E3,
EA, E32, MX, MX6 models:
5.2 GHz, 5.8 GHz
Modulation method
DSSS
Power requirements
US, CND models:
120V AC, 60Hz
PX model:
110V - 240V AC, 50/60Hz
MX model:
120V AC, 60Hz
MX6, E32 models:
110V - 240V AC, 50/60 Hz
Other models:
220 V – 240 V AC, 50/60 Hz
Power consumption
On: 55 W (TA-SA500WR)
70 W (TA-SA600WR)
45 W (TA-SA700WR)
Standby power consumption
0.5 W (standby mode)
0.3 W (turned off)
Dimensions (w/h/d) (approx.)
200 mm × 64 mm × 211.5 mm
(7
7
/8 in × 2
5
/8 in × 8
3
/8 in)
Mass (approx.)
1.3 kg (1 lb 14 oz)
Design and specifi cations are subject to change
without notice.
To Next Page
Need help?
General
