1
2
3
1
Press the (Quick Settings) button on the remote control, then select
[Settings] — [Remotes & Accessories].
Select a paired but unconnected device.
Select [Connect].
Related topics
Supported Bluetooth profiles
Operation cuts out, or a device does not work.
You want to output sound from the headphones/Bluetooth audio device and audio
system/TV speakers at the same time.
[71] Bluetooth devices | Bluetooth devices
Adjusting the AV sync setting
If a Bluetooth audio device is connected, there may be a delay between the picture and
sound due to the properties of Bluetooth. You can adjust the delay between the picture
and sound with the A/V sync setting. (Only for Bluetooth A2DP-supported models that can
use Bluetooth audio devices.)
Bluetooth A2DP-supported models that support Bluetooth audio devices have [A/V sync]
in [Settings] — [Display & Sound] — [Audio output].
Press the (Quick Settings) button on the remote control, then select
[Settings] — [Display & Sound] — [Audio output] — [A/V sync] — the desired
option.
Hint
You can also adjust the output timing of the picture and sound if a specific audio
system is connected with an HDMI cable. For details about supported models, refer
to the support site.
Support Site
Note
Depending on the connected Bluetooth audio device, the picture and sound may not
match even when the [A/V sync] setting is set to [On] or [Auto].
To Next Page
Loading...
Need help?
General
