Sony CDP-CX455 - Controlling Tile Player by Another Unit

3 Press [2> to start playing.
The MEGA CONTROL button lights up when a
track in the second player is selected.
To cancel No-Delay/X-Fade Play
Press the corresponding button repeatedly until "NO
DELAY" o1" "X FADE" disappears flora tile display. Tile
current player continues playing.
You can change the method (No-Delay or X-Fade)
during play
Press the corresponding button (NO DELAY or X FADE)
following the procedure in step 2.
You can start X-Fade at any point of the track
Press FADER during X Fade Play.
Even after you have set the X Fade mode and started
X Fade [)lay, you can start X Fade manually at any point
you like. Note that you cannot do this operation while
the sound fl'om hoth players is mixed.
Notes
• Play starts fl'om the second player if you stalt play while
the MEGA CONTROL button is lit.
• When one player has played all the discs o1"tracks in the
player ahead of the other player, play stops.
• Do not use the controls on the second player during
No Delay/X Fade Play. They may not work correctly.
Controlling the Player by
Another Unit
When you connect tile player to a Sony MD deck
compatible with the Mega Control f\mction, or operate
a Sony MD deck by using computer software such as
"MD Editor," you IllHSt set tile player as described
below:
MENU/NO YES JOG
Ii1.................
oooo
o
1 Press MENU/NO.
3
Turn tile JOG dial until "CONTROL A1 ?" appears
in tile display window.
Press YES.
"CONTROL AI??" appears in tile display.
4 Press YES.
To return to normal setting
After following steps 1and 2, and "CONTROL AIII ?" is
displayed, then press YES.
Notes
• You can per%rm the operation above correctly only when
you operate Disc 1 to Disc 200.
• You cannot operate this player correctly from another
player that does not have the CONTROL A111jack. In this
case, operate the other player fl'om this player.
32 us