Sony CDX-656 - JACK Board; MAIN Board, Slide Variable Resistor (Elevator Height Sensor) (RV202)

7
CDX-656/656X
2-4. JACK BOARD
2-5. MAIN BOARD, SLIDE VARIABLE RESISTOR (ELEVATOR HEIGHT SENSOR) (RV202)
Remove the jack board of
the arrow.
1 ground point screw
(PTT2.6
× 6)
2 jack board
2 Remove two solders of
the elevator motor leads (M104).
2 Remove two solders of
the switch board leads.
2 Remove three solders of
the slide variable resistor
(RV202).
4 heat sink (T)
3 screw (PTT2 × 4)
6 main board
5 two screws (FP)
1 main flexible board
(CNJ101)
5 screw (FP)
7 screw
(PTT2
× 4)
8 slide variable resistor
(elevator height sensor)
(RV202)