33
CDX-A360
60 UNISCK O S-Bus clock signal output
61 611_SEL I Mechanism deck select signal input
62 WMA I WMA select signal input
63 NCO O Not used. (Open)
64 SIRCS I Remote control signal input
65 to 67 NCO O Not used. (Open)
68 FLASH_W I Memory mode select signal input Not used in this set.
69, 70 NCO O Not used. (Open)
71 RC_IN1 I Rotary commander shift key signal input
72 ACC_IN I Accessory power supply detect signal input
73 TESTIN I Test mode detect signal input
74 TELATT I Telephone attenuate detect signal input
75 NCO O Not used. (Open)
76 XKEYON O A/D converter power supply control signal output
77 RESET I CPU reset signal input
78 NCO O Not used. (Open)
79 XOUT O Sub-clock output (32.768 kHz)
80 XIN I Sub-clock input (32.768 kHz)
81 VSS1 — Ground
82 OSC IN I Main-clock input (3.68 MHz)
83 OSC OUT O Main-clock output (3.68 MHz)
84 VCC3 — Power supply (+3.3 V)
85 DEMOSEL I DEMO select signal input
86 ATT O Audio mute control signal output
87 BUSON O Bus on signal output
88 SYSRST O System reset signal output
89 EJECT_OK_SW O Eject OK signal output
90 to 92 NCO O Not used. (Open)
93 Z-MUTE I CD zero cross mute detect signal input
94 to 97 NCO O Not used. (Open)
98 CD_ON I CD mechanism power control request signal input
99 CDM_ON I CD mechanism deck power control request signal input
100 NCO O Not used. (Open)
Pin No. Pin Name I/O Pin Description
To Next Page
Loading...
