To Next PageTo Next Page
Need help?Do you have a question about the Sony CDX-G1302U and is the answer not in the manual?
General| Tuner | FM/AM |
|---|---|
| CD Playback | Yes |
| USB Playback | Yes |
| Bluetooth | No |
| Display Type | LCD |
| AUX | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| Detachable Faceplate | No |
| Remote Control | No |
| Channels | 4 |
| RMS Power Output | 17W x 4 |
| Power Output | 4 x 55 W |
| Maximum Output Power | 4 x 55 W |
You can detach the front panel of this unit to prevent theft.
Before operating the unit for the first time, after replacing the car battery, or changing the connections, you must reset the unit.
Procedure to set the time and date on the unit.
Configures the unit's region for proper radio reception and functionality.
Allows users to view the current battery voltage of the car.
Instructions for connecting a USB storage device to the unit.
Guide for connecting external audio devices via the AUX input.
Automatically stores the strongest radio stations on number buttons.
Manual and automatic methods for tuning radio stations.
Allows users to manually store desired radio stations.
How to recall and listen to pre-stored radio stations.
Enables advanced radio features like AF and TA.
Maintains reception of a specific regional station.
Enables selection of other local stations in the area.
Searches for stations broadcasting a selected program type.
Instructions for inserting and playing audio CDs.
Details on connecting and playing audio files from USB devices.
Methods for navigating and playing audio files on discs or USB.
Options for repeating tracks or shuffling playback order.
Efficiently searches for tracks using a categorized list.
Navigates through large music libraries by jumping through items.
General overview of how to navigate and change settings.
Configuration options for area, demo, clock, beep, and auto-off.
Disables the automatic demonstration display.
Sets the USB connection mode (Android or MSC/MTP).
Configures radio features for signal strength and traffic alerts.
Restricts radio reception to a specific geographic region.
Manages automatic storage of radio stations.
Adjusts audio settings like equalizer, balance, and fader.
Controls subwoofer output level, phase, and low-pass filter frequency.
Sets the cut-off frequency for front and rear speakers.
Adjusts the volume level for connected auxiliary devices.
Configures display brightness and dimmer settings.
Instructions for updating the unit's internal software.
Important safety and handling advice for the unit.
Information regarding playable disc types and handling.
Diagram illustrating the playback sequence of audio files.
Technical details for radio reception frequency and sensitivity.
Technical details for Medium Wave and Long Wave reception.
Technical details for CD playback performance and limits.
Technical details for USB playback, including protocol and limits.
Details on supported audio codecs (MP3, WMA, FLAC) and their bitrates.
Technical details for speaker output power and impedance.
General specifications including power requirements, dimensions, and weight.
Legal information regarding software and trademarks.
Addresses common problems like sound, beeps, stored settings, and display.
Solutions for static, poor signal, and RDS/TA/PTY reception problems.
Troubleshooting for issues with CD playback, including disc errors and file compatibility.
Solutions for USB device detection, playback, and mode compatibility problems.
Explanation of messages displayed during operation, like INVALID, READ, CD ERROR.
Important safety precautions for wiring and connections.
Advice on choosing installation location and avoiding dust or heat.
Lists components included for installing the unit.
Diagrams and instructions for connecting the unit's cables.
Detailed wiring instructions for speakers, power, and antenna.
Instructions for connecting a subwoofer without a power amplifier.
Wiring details for connecting speakers to the car's connectors.
Wiring details for connecting power supply and antenna.
Steps for physically installing the unit into the dashboard.
Steps to detach the mounting bracket and protection collar.
Instructions to enable and configure the wired remote control.
Procedure for securely mounting the unit within the car's dashboard.
Instructions for replacing the unit's fuse if it blows.
