CDX-GT61UMS/GT560UE/GT560UI/GT560US/GT564UI/GT610UG/GT610US/GT616UG
37
Pin No. Pin Name I/O Description
64 to 67
TRACEDATA0 to
TRACEDATA3
- Not used
68 CP_SDA I/O Serial data input/output for the EEPROM
69 CP_SCL O Serial data transfer clock signal output to the EEPROM
70 NC - Not used
71 CP_RESET O Reset signal output to the EEPROM
72 CPON O Power supply on/off control signal output terminal for the EEPROM
73 CDON_15V O Power supply on/off control signal output terminal for the CD section
74 VBUS_ON O VBUS on/off control signal input from the system controller “H”: VBUS on
75 NC - Not used
76 REGVCC3 - Power supply terminal (+3.3V)
77, 78 XT1, XT2 - Not used
79 CVCC3 - Power supply terminal (+3.3V)
80 X1 I System clock input terminal (12 MHz)
81 CVSS - Ground terminal
82 X2 O System clock output terminal (12 MHz)
83 DVCC3 - Power supply terminal (+3.3V)
84 DVSS - Ground terminal
85, 86 USB+, USB– I/O Digital audio data bus terminal
87 NMI - Not used
88, 89 TEST - Not used
90, 91 NC - Not used
92 AVCC3 - Power supply terminal (+3.3V)
93 to 100 NC - Not used
To Next Page
Loading...
