Basic Operations
Basic Operations
11
GB
3 Press z to start recording
(N is depressed automatically).
Use these buttons for additional operations
Tips
• Adjusting the volume or
the audio emphasis (see
page 28) will not affect
the recording level.
• If the AM/MW/LW
program makes a
whistling sound after
you've pressed z in step
3, press PLAY MODE•
MONO/ST ISS
(Interference Suppress
switch) repeatedly until
the noise is at a
minimum.
• For the best results, use
the AC power as a
power source.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press X.
3 Press N.
4 Press z.
5 Press X.
To Press
stop recording xZ
pause recording X
Press the button again to
resume recording.
turn on/off the player OPERATE
(or POWER, see page 2)
xZ
X
OPERATE
(or POWER)
PLAY MODE
MONO/ST ISS
N
R
E
C
To Next Page
Loading...
Need help?
General