Basic Operations
Basic Operations
11
GB
3 Press r to start recording
(( is depressed automatically).
Use these buttons for additional operations
Tips
• Adjusting the volume or
the audio emphasis (see
page 27) will not affect
the recording level.
• CFD-S28L/S38L only: If
the MW/LW program
makes a whistling
sound after you've
pressed r in step 3,
press PLAY MODE•
MONO/ST ISS
(Interference Suppress
switch) repeatedly until
the noise is at a
minimum.
• For the best results, use
the AC power as a
power source.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press FUNCTION to
select “TAPE”.
3 Press r.
To Press
stop recording p6
pause recording P
Press the button again to
resume recording.
turn on/off the player OPERATE (or POWER, see
page 2)
p6
P
OPERATE
(or POWER)
FUNCTION
REC
PLAY MODE
MONO/ST ISS
To Next Page
Loading...
