24
Changing the AM/MW tuning
interval
If you need to change the AM/MW tuning
interval, do the following:
1 Press RADIO BAND•AUTO PRESET
until “AM” or “MW” is displayed.
2 Press DISP/ENT/MEMORY for 2
seconds.
3 Press RADIO BAND•AUTO PRESET for
2 seconds.
“AM 9” “MW 9” or “AM 10” “MW 10”
flashes.
4 Press PRESET + or – to select “AM 9”
“MW 9” for 9 kHz interval or “AM 10”
“MW 10” for 10 kHz interval.
5 Press DISP/ENT/MEMORY.
After changing the tuning interval, you need
to reset your preset AM/MW radio stations.
Choosing the power sources
(continued)
To Next Page
Loading...
