Setting Up14
Playing both
decks in
succession
You can play both decks (from deck B to
deck A only) in succession.
1 Insert the cassette you want to play
first into deck B and the other
cassette into deck A.
2 Press ( PLAY on deck B and then
press PLAY and P on deck A at the
same time.
When the tape ends on deck B, the
playback starts automatically on deck
A.
The Tape Player
The Tape Player
0
)
PLAY
P
( PLAY
The beginning
of the next
track
)
0
The beginning
of the current
track
0
)
Finding the
beginning of a
track (AMS*)
The player senses where a track begins
by detecting the pauses between the
tracks (deck B only).
*Automatic Music Sensor
1 While playing a tape, press ) or
0.
Playing
side
Front
side (()
Reverse
side (9)
The tape is wound or rewound to the
beginning of the next or current track, and
play will start automatically.
Notes
• If a soft sound like pianissimo continues for
some seconds in a track, the player may start
to play as the next track.
•
If you press ) or 0 when there is no sound
in the track, this function does not operate
correctly.
• To find the beginning of a track correctly, a
pause of approx. 4 seconds or longer is
necessary.
To Next Page
Loading...
