CMT-LX30iR.GB.4-131-632-11(1)
12
GB
Setting the clock
Use buttons on the remote to set the
clock.
1
Turn on the system.
Press /.
2
Select the clock set mode.
Press TIMER MENU.
If “PLAY SET” ashes, press /
repeatedly to select “CLOCK,” and
then press .
3
Set the time.
Press / repeatedly to set the hour,
and then press .
4
Use the same procedure to set
the minutes.
Note
e clock settings are lost when you disconnect
the power cord or if a power failure occurs.
To display the clock when the system
is o
Press DISPLAY. e clock is displayed for
about 8 seconds.
To Next Page
Loading...
