Sony CMT-LX30IR - Customization and Advanced Features; Creating Custom Playlists (Program Play)

CMT-LX30iR.GB.4-131-632-11(1)
23
GB
Operations
Note on shue play mode
When you turn o the system, the selected
shue play mode (“SHUF” or “ SHUF”) is
cleared and the play mode returns to normal
play mode (“ ”).
Notes
 e following USB device/situations can
increase the time it takes to start playback:
 a USB device recorded with a complicated
tree structure.
 the memory capacity is excessive.
 e system can play back to a depth of 8
folders only.
 is system does not necessarily support all
the functions provided in a connected USB
device.
 Resume play is canceled when you turn o
the system.
 e playback order for the system may dier
from the order of the connected USB device.
 Folders that have no audio les are skipped.
 e le formats that this system can play are
as follows:
 MP3: le extension “.mp3”
 WMA le: le extension “.wma”
 AAC: le extension “.m4a”
Note that even when le names have the
above le extensions, if the actual les dier,
playing these les may generate a loud noise
which could damage the speaker system and
the system may malfunction.
Creating your own
program
(Program Play)
Use buttons on the remote to create your
own program.
1 Select the desired function.
CD
Press FUNCTION +/ repeatedly to
select the CD function.
USB
Press FUNCTION +/ repeatedly to
select the USB function.
2 Select the play mode.
Press PLAY MODE repeatedly until
“PGM” appears while the system is
stopped.
3 Select the desired track or le
number.
Press / repeatedly until the
desired track or le number appears.
When programming MP3 les, press
+/ repeatedly to select the
desired folder, and then select the
desired le.
Selected track or le number
Total playing time of the
selected track or le
Continued
