Sony CMT-LX30IR - Changing the Display

CMT-LX30iR.GB.4-131-632-11(1)
26
GB
Changing the display
To Press
Change
information on
the display
1)
DISPLAY repeatedly
when the system is on.
Check the
clock when the
system is o
DISPLAY when the
system is o
2)
. e
clock is displayed for 8
seconds.
1)
For example, you can view CD/MP3 disc
information or the USB device information,
such as;
 track or le number during normal play.
 track or le name (“ ”) during normal
play.
 artist name (“ ”) during normal play.
 album or folder name (“ ”) during
normal play.
 total playing time while the player is
stopped.
 volume label if it exists on the disc or USB
device.
2)
e STANDBY indicator on the unit lights
up when the system is o.
Notes on the display information
 Characters that cannot be displayed appear
as “_”.
 e following are not displayed:
 total playing time and remaining playing
time for an MP3 disc and USB device.
 remaining playing time for an MP3 le.
 e following are not displayed correctly:
 elapsed playing time of an MP3 le
encoded using VBR (variable bit rate).
 folder and le names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
 e following are displayed:
 total playing time for a CD-DA disc
during normal play.
 remaining playing time for a track.
 remaining playing time of a current
CD-DA disc during normal play.
 ID3 tag information for MP3 les when
ID3 version 1 and version 2 tags are used
(ID3 version 2 tag information display
has priority when both ID3 version 1 and
version 2 tags are used for a single MP3
le).
 up to 15 characters of ID3 tag, WMA tag
and AAC tag information using uppercase
letters (A to Z), numbers (0 to 9), and
symbols (˝ $ % ’ ( ) * , – . / < = > @ [ \ ] _ `
{ | } ! ? ^).