Sony CMT-LX30IR - System Specifications

CMT-LX30iR.GB.4-131-632-11(1)
39
GB
Additional Information
Specications
Main unit
Amplier section
European model:
DIN power output (rated):
4 + 4 watts (4 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference):
5 + 5 watts (4 ohms at 1 kHz, 10%
THD)
Music power output (reference):
9 + 9 watts (4 ohms at 1 kHz, 10%
THD)
Other models:
DIN power output (rated):
4 + 4 watts (4 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference):
5 + 5 watts (4 ohms at 1 kHz, 10%
THD)
Inputs
AUDIO IN (stereo mini jack):
Voltage 775 mV, impedance
22 kilohms
Outputs
PHONES (stereo mini jack):
accepts headphones with an
impedance of 8 ohms or more
SPEAKER: accepts impedance of 4 ohms
USB section
Supported bit rate:
MP3 (MPEG 1 Audio Layer-3):
32
 320 kbps, VBR
WMA: 32
 192 kbps, VBR
AAC: 48
 320 kbps
Sampling frequencies:
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
(USB) port:
Maximum current:
500 mA
CD player section
System:
Compact disc and digital audio
system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
*is output is the value measurement at
a distance of 200mm from the objective
lens surface on the Optical Pick-up
Block with 7mm aperture.
Frequency response: 20 Hz  20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Continued
