10
GB
CMT-SBT20B
4-582-332-11(1)
Preparing the
remote control
Insert an R6 (size AA) battery (not supplied),
matching the polarities as shown below.
Notes on using the remote control
• With normal use, the battery should last for
about six months.
• If you do not use the remote control for a long
period of time, remove the battery to avoid
damage from battery leakage and corrosion.
Attaching the
speaker pads
Attach the supplied speaker pads at each
corner on the bottom of the speakers to
prevent them from slipping.
Setting the clock
1
Press /
to turn on the
system.
2
Press TIMER MENU
to enter
the clock set mode.
The hour indicator flashes on the
display
.
If “SELECT” or “PLAY SET” appears, press
/
to select “CLOCK,” and then
press
.
3
Press
/
to set the hour, then
press
.
The minute indicator flashes on the
display
.
To Next Page
Loading...
